Produkty dla a dodatki (189)

Verfügbar für System 75 und 100 Maste. Max. Höhe 13 m (mit System 100). Kompatibel mit 3,5 m IAMs. Erfüllt MIL-STD-810G. Mit dem innovativen 3,5 m IAM-Montagesatz von Rolatube können Sie Ihren 3,5 m IAM auf bisher unerreichte Höhen heben, indem Sie ihn auf dem System 75 Einzelrohrmast oder dem System 100 Mast montieren. Durch den Montagesatz kann der Nutzer die Rolatube 3,5 m IAMs auf System 75 Einzelrohrmaste (bis zu 5 m) und System 100 Maste (bis zu 10 m) montieren, wodurch die folgenden Frequenzen in noch größerer Höhe verfügbar werden: 30–300 MHz (SQUAD), 136–470 MHz (TEAM) und 136–175 MHz (RESQ). Mit dem Montagesatz können die Maste des Systems 75 auf eine Höhe von bis zu 8 m und die Maste des Systems 100 auf eine Höhe von bis zu 13 m verlängert werden. Der Rolatube 3,5 m IAM-Montagesatz wird nach MIL-STD-810G hergestellt und ausschließlich von Rolatube Technology, dem Hersteller der weltweit leichtesten Mastsysteme, angeboten.

(A) Counter Balanced - spring loaded lift mechanisms. (B) Complete leg assembly – Trip-Free© legs with new, segmented leg connector bar (patent pending). Complete with all hardware and fittings to completely assemble the cabinet, install the mechanisms, and install leg assembly. Complete, easy to follow, step-by-step instructions. 18-page manual includes cut lists and assembly instructions for single/twin, double/full and queen beds. Our mechanisms are some of the most heavy-duty in the wallbed Industry. The larger rivet mounted in lubricated brass bushings make this mechanism the strongest and most reliable it could be. Steel protective covers (not plastic) ensure years of safe operation.

Using EZ-Splice™ belt joining strand during installation will dramatically extend your belt life! Belt installations that are rushed and improperly made are often the cause of belt breakage and downtime. EZ-Splice™ is a pre-formed, pre-bent joining strand that requires no bending or weaving during installation. This helps to prevent any weak spots in the belt joint.

Cable Management products are an essential inside many Industries, most commonly being employed inside Office based and Educational Facilities where Health & Safety regulations are monitored and reviewed on a regular basis. Each of the products available works to reduce and organize cables, providing a cleaner and more functional area for you to work from. All of our Cable Management solutions is available on our website, along with free sampling so you can try before you buy. Styles Available::Grommets Snap Bushes:Desk Grommets Snap Fit Bushes:Grommet Rolls

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary flow tester: D670. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Flow measurement in direct or indirect testing Continuous measuring mode Wide flow measurement range USA, S.I. and customer units Measurement in standard or customised conditions Recalculated flow at the nominal pressure Measurement element fully integrated into one module 128 programs Mechanical or electronic regulator from vacuum to 10 bar Weight:7 Kg Dimensions:(WxHxD) 540x160x380 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Tutti gli accappatoi in 100% cotone. GSM: 380-450

Clamp accessories

Introducing our cutting-edge Motorcycle Leather Race Suit, a pinnacle of performance and style for avid riders. Engineered with precision and crafted with the highest quality materials, this suit is designed to elevate your riding experience to new heights.Key Features:1. Premium Leather Construction:Crafted from top-grain cowhide leather, our race suit offers unmatched durability and abrasion resistance. The high-quality leather not only provides superior protection but also ensures maximum flexibility for dynamic riding.2. Advanced Safety Technology:Engineered with safety as our top priority, the suit incorporates CE-approved armor in key impact zones. The armor is strategically placed on shoulders, elbows, and knees to provide comprehensive protection without compromising on agility. Vendor:Racers Arena SKU:KTM007

Crystal accessories are comprised of base insulators for crystals, Euroquartz part numbers Y45UINSA, (for UM-1 crystals,) Y18UINSA (for HC49 crystals,) and Y33UINSA (for HC51 crystals.) Also includes the crystal clip for the horizontal mounting of HC49 crystals, part number Y18UCLPA

Wall panels made of high quality gypsum material. Easy to install with elegant and stylish design. In addition to the innovative design 3D panels also contribute to the energy efficiency of any room, as they are good thermal and sound insulation. The 3D wall panels can be painted with almost all types of paints to give an unique artistic atmosphere and also can be supplemented with LED lights or original wall lamps. For the manufacture of our products we use safe and environmentally friendly materials. Manufactured in EU • Soundproof • Thermal insulation • Non-flammable • Indoor use only Product information: • Panel size: H:50 cm x W:50 cm • 4 Panels: 1 m2 • Panel thickness: 1.5 - 3 cm • Panel weight: 6 kg~ • Colour: White Free delivery to UK and Europe Estimated delivery: 7-21 working days Reference:V0118 Panel Size:H:50 cm x W:50 cm Panel weight:6 kg Panel Thickness:1.5 - 3 cm

For use on any Rolatube System 75 or 100 mast, or System 50 tripod, to provide a c.228mm (9″) spigot to which equipment can be secured. System 100 masts System 75 masts System 50 masts System 50 tripods

The camera mounting adapter can be used on all Rolatube masts and tripods. It provides a 100mm (4”) spigot and incorporates a standard 6mm (0.25″) Whitworth screw for direct interface with a camera. System 100 masts System 75 masts System 50 masts System 50 tripods Material:Thermoplastic

For use in any 30mm (1.1″) spigot hole as provided on all Rolatube masts and System 50 tripods. The kit reduces the 30mm (1.1″) spigot hole to 24mm (0.9″) female, with the option to further provide a 17mm (0.6″) male. Compatible with: System 100 masts System 75 masts System 50 masts System 50 tripods Short Spigot Adaptor & Reducer

Optimised for the Cambium Wireless Access Point, with a hole pattern for side mounting additional equipment. System 75 double tube mast systems

THIS TRIPOD IS NOT TELESCOPIC - INSTEAD IT USES A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. Using the unique Rolatube rollable composite for the legs, the ICT is able to roll up into the smallest pack size. With a choice of legs of 650mm or 1250mm in length, this small but mighty tripod can take top loads of up to 40kg. Optional accessories include peg plates and pegs or foot spikes, so your valuable equipment is secure and stable. The, when you're done, roll it all up and move on.

For use on any Rolatube mast system to provide a 1.01m (40”) span for securing multiple antenna. System 50 masts System 75 masts System 100 masts

Optimised for the Radwin Microwave Antenna, with a hole pattern for side mounting additional equipment. System 75 double tube mast systems

Available for single and double tube masts Easy & quick attachment to the tripod head Secure clamp for the mast The Mast Support Adapter enables a Rolatube System 50 tripod to be used as a support for either a System 75 or 100 mast where conditions allow. This is useful if ground pegs cannot be used. Quick and secure attachment to the tripod head is provided via a strong clamp to support the mast. Removes the need for guy ropes where conditions allow; Provides additional support during mast deployment, thereby reducing the number of personnel required. System 75 single tube mast, System 75 double tube mast, System 100 mast. Material:Thermoplastic

Available for System 75 & 100 masts Max height of 13m (with System 100) Compatible with 3.5m IAMs MIL-STD-810G Rolatube’s innovative 3.5m IAM mount kit enables you to raise your 3.5m IAM to previously unattainable heights by mounting it on top of the System 75 single tube mast or System 100 mast. The mount kit enables the user to mount the Rolatube 3.5m IAMs onto System 75 single tube masts (up to 5m) and System 100 masts (up to 10m), thereby enabling the following frequencies at even greater heights: 30-300MHz (SQUAD), 136-470MHz (TEAM) and 136-175MHz (RESQ). Heights achieved are up to 8m on the System 75 masts and up to 13m on the System 100 masts. Manufactured to adhere to MIL STD 810G, the Rolatube 3.5m IAM mount kit is unique to Rolatube Technology, manufacturer of the lightest weight mast systems in the world.

The Central Guy Control (CGC) can be used with the System 75 and System 100 masts to bring unparalleled ease, speed and flexibility to deployment. By bringing the control of three guy ropes to one person, the CGC uniquely enables the deployment of a mast system of up to 10m (32.8’) by only 2 people, instead of the usual 4. A video showing the CGC being used in the setup of the SYSTEM 100 mast is here.

For use with System 75 Double Tube Mast Systems. Secure and hinged base plate. Hinged base plate for the System 75 Double Tube Mast. This optional accessory makes deployment even easier by providing a secure, hinged base for the mast body. System 75 double tube mast systems

Rolacage for System 75 masts Lightweight and strong; Faster mast deployment at variable heights; Can be carried or vehicle mounted. The Rolacage enhances the operation of a System 75 Single Tube Mast. It enables all System 75 single tube masts to be deployed and recovered more quickly and at variable heights up to the masts’ maximum height. The Rolacage can be pegged to the ground or bolted to the deck of a vehicle or trailer and the mast can be stored in the Rolacage if required. Compatible with: System 75 single tube mast systems Material:HDPE, Aluminium

Optimised for the Cisco Wireless Access Point, with a hole pattern for side mounting additional equipment. System 75 double tube mast systems

Le Contrôle à Hauban Central (CGC) peut être utilisé avec les mâts System 75 et System 100 pour apporter une facilité, une vitesse et une flexibilité inégalées au déploiement. En permettant le contrôle de trois haubans par une seule personne, le CGC permet, de façon unique, le déploiement d’un système de mât jusqu’à 10 m (32,8 pi) par seulement 2 personnes, au lieu des 4 habituelles. Une vidéo montrant le CGC utilisé dans la configuration du mât SYSTEM 100 est disponible ici.

Conveyor Belt clips are used for joining the belt during installation and for making fast minor repairs to the belt. They are available in one space and three space units. If you would like clips, these should be ordered at the same time you place your belt order.

Ottimizzato per l'antenna a microonde Radwin, con uno schema di fori per il montaggio laterale di apparecchiature aggiuntive. Sistemi di montanti a doppio tubo System 75

À utiliser sur tout mât Rolatube System 75 ou System 100, ou trépied System 50, pour fournir un ergot d’environ 228 mm (9") auquel l’équipement peut être fixé. Mâts System 100 Mâts System 75 Mâts System 50 Trépieds System 50

Brand new to the Vital Parts range, these Strain Relief solutions are designed for use inside electrical wiring systems. Preventing a wire or cord from being pulled out of position, these are typically used inside an electronic appliance to prevent internal damage. We stock a range of options including liquid tight bushings and strain relief glands, each having their own unique set of characteristics. Styles Available::Liquid Tight Bushings Cordgrip Glands:Pigtail Glands Metric Glands:Liquid Tight Glands

L'adattatore per il montaggio della telecamera può essere utilizzato su tutti i montanti e i treppiedi Rolatube. Dispone di un attacco da 100 mm (4") con unavite Whitworth standard da 6 mm (0,25") per l'interfaccia diretta con una telecamera. Montanti System 100 montanti System 75 Matériau:termoplastico

Cable Glands are a widely used product inside professional industries that regularly deal with the manufacturing and production of household and general appliances. Used to compress and hold a wire in position, these offer integrity to an appliance and prevent the wire from being pulled out from its circuit. As a threaded product these glands can screw into place, aiding the installation process as there is no need for adhesives or fixings. These Threaded Glands are available in a large range of sizes and colour ways, including RAL Grey, White & Black colours. Free sampling is available through our website along with bulk pricing, something which is offered across our full range of cable management products and consumables. RAL Colours :Threaded Styles Compresses Wires:Metric Fittings M12 - M32:3-18mm Cable Diameters